Skjul

Soteria

Show Filters Hide Filters
  • Prodnr: Produktnummer: 116004

     - Produsent: Apollo Fire


    SOTERIA Multisensor

    The Soteria Optical/Heat Multisensor Detector uses new optical sensing technology, PureLight®, to detect smoke particles entering the chamber and is fitted with two thermistors for detecting heat. It can be switched to detect smoke, heat or a combination of both offering greater flexibility. Lukk
    SOTERIA Multisensor
  • Prodnr: Produktnummer: 116007

     - Produsent: Apollo Fire


    SOTERIA Sokkel

    All detectors in the Soteria®, Discovery® and XP95® range fit into the XPERT 8 Intelligent Mounting Base. The base has a wide interior diameter for ease of access to cables and terminals. The ‘E-Z Fit’ feature allows you to fit the base screws, place the XPERT 8 Intelligent Mounting Base over the screws, slide it into place and tighten the screws. The detector requires a clockwise rotation into the base for fitting. Additionally the detector can be locked into the base for increased security, by a grubscrew using a 1.5mm hexagonal driver. The XPERT 8 card, Part Number 38532-064, supplied with the base, has pre-punched pips to remove to set the address. Refer to the XPERT 8 Intelligent Mounting Base Installation Guide 39215-005 for details on how to set the address. Lukk
    SOTERIA Sokkel
  • Prodnr: Produktnummer: 116006

     - Produsent: Apollo Fire


    SOTERIA Varmedetektor

    The Soteria Heat Detector features two heat sensors located laterally to ensure accurate heat detection in all orientations Lukk
    SOTERIA Varmedetektor
  • Prodnr: Produktnummer: 116005

     - Produsent: Apollo Fire


    SOTERIA Optiskedetektor

    The Soteria Optical Smoke Detector uses new optical sensing technology, PureLight®, to detect smoke particles entering the chamber. PureLight marks a new stage in the development of Apollo optical technology and aims to reduce the possibility of false alarms whilst increasing the reliability of detection of a real fire. Lukk
    SOTERIA Optiskedetektor
  • Prodnr: Produktnummer: 116008

     - Produsent: Apollo Fire


    SOTERIA Manuell melder

    The Intelligent Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated by pressing the resettable element. The manual call point signals to the Control and Indicating Equipment using an interrupt feature within the Apollo Digital Protocol. An alarm status is indicated through the rotation of the resettable element, displaying yellow and black indication bars and a solid red LED. The manual call point can be easily reset from the front using the supplied reset key. Lukk
    SOTERIA Manuell melder

Gör ditt fönster större för en bättre upplevelse!